J3 Technology

Product Description

Sontay Water Leak Detection Controller & Water Leak Sensing Cable

• Detects Water leak under floor & isolated plant rooms
• LED Status of leak status
• VFC output
• Audible alarm
• Auto or manual reset alarm output
• Uses an isolated AC signal which prevents oxidation or erosion of sensing modules

Due to our enormous understanding and massive knowledge of this business, we are involved in offering Water Leak Detection System.

Other Details:

J3 Technology make water leak detection panels are designed to the latest technology confirm to international standards ensuring top quality performance and Absolut reliability and easy installation. Designed to compel with is -2189 -1999 and ip 54.

Cabinet :

The control panel cabinet is fabricated from crca sheet of 16 swg and is properly pretreated before. painted with power coated p.o. red / siemens grey / textured white. the cabinet is dust proof.

Circuit:

Control circuit are fully solid state consist of glossy epoxy circuit board(1.6 mm thick) and treated with a protec- tive layer of special lacquer for protection against corrosion. all the card are moduler concept and plug in type for inter-changeable. one sets of common NO/ NC/ C contacts are available in alarm conditions as per requirement'

Functioning Descriptions:

The water Leak Detection Panel is the central processing unit of the system, providing the audible and visual information to the user, initiating automatic alarm response sequences and providing the means by which the user interacts with the system.

The Water Leak Detection Panel shall be able to be easily configured to meet the exact detection zone and cause/ effects output requirement of the building.Each zone card shall be capable of providing 300mA current and shall maintain a minimum of 24v on the zone up to the full extent of the battery standby period.

 

1. Introduction

The WLD8ZMB is an 8-zone Water Leak Detection Panel used to detect water leakage using sensing cables or probes. Each zone works independently and gives visual, audible, and relay outputs during leak or fault conditions.

TECHNICAL SPECIFICATIONOF PANEL

 

Model                                         : J3-Saini-Z2 , J3-Saini -Z4 & J3-Saini-Z8

Power                                         : AC220V/50HZ+10% and 24 AC

Voltage scope                            : 18v-28V

Charging voltage                       :27.6V

Charging current                       : 1AMP(MAX.)

 

EOL resister                              :4k7

Materials                                   : M.S. Sheet 16SWG

Color                                         : Siemens Gray

Dimension                                : 355 x 285 x 110mm approx..(up to 4 zone)

Weight                                      : 4 kg. Approx. without bat.

Battery                                     : 2 x 12 v/7 Ah

 

 

SILENCE FEATURE:

1.      Micro controller based compact modular designed

2.      The module enables a water alarm panel to be controlled by a state of the micro controller.

3.      With built in 1 -line and 16-character LCD display

4.      Hustle free instant installation.

5.      Soft touch type control key and test switch on fascia.

6.      Provision for attachment of public address system and Auto dialer facility(optional)

7.      Match with interior design of premises.

8.      Custom built -in configuration possible for integration with Building management system.

9.      System can be integrated with all standard industry products.

10.   Provision for alarm and fault repeaters.

11.   Zone wise zonal panel dry contacts (optional)

Liquid leakage detection in a server room or datacentre. 

Due to our enormous understanding and massive knowledge of this business, we are involved in offering Water Leak Detection System.

Other Details:

J3 Technology make water leak detection panels are designed to the latest technology confirm to international standards ensuring top quality performance and Absolut reliability and easy installation. Designed to compel with is -2189 -1999 and ip 54.

Cabinet :

The control panel cabinet is fabricated from crca sheet of 16 swg and is properly pretreated before. painted with power coated p.o. red / siemens grey / textured white. the cabinet is dust proof.

Circuit:

Control circuit are fully solid state consist of glossy epoxy circuit board(1.6 mm thick) and treated with a protec- tive layer of special lacquer for protection against corrosion. all the card are moduler concept and plug in type for inter-changeable. one sets of common NO/ NC/ C contacts are available in alarm conditions as per requirement'

Functioning Descriptions:

The water Leak Detection Panel is the central processing unit of the system, providing the audible and visual information to the user, initiating automatic alarm response sequences and providing the means by which the user interacts with the system.

The Water Leak Detection Panel shall be able to be easily configured to meet the exact detection zone and cause/ effects output requirement of the building.Each zone card shall be capable of providing 300mA current and shall maintain a minimum of 24v on the zone up to the full extent of the battery standby period.

WATER LEAK ALARM INDICATION:

The water leak Detection Panel shall monitor the status of all Sensor Cable on the zone for water, and the status of internal connection and interfaces including charger and batteries.

SALIENT FEATURE:

Micro controller based compact modular designed

The module enables a water alarm panel to be controlled by a state of the micro controller.

With built in 16 character LCD display.

Hustle free instant installation.

Soft touch type control and test switch on fascia.

Auto re-store after alarm / fault.

Provision for attachment of public address system and Auto dialer facility (optional)

Match with interior design of premises.

Custom built configuration possible with potential free for integration with Building management systems.

System can be integrated with all standard industry products.

Provision for alarm and fault repeaters.

Zonal panel dry contacts.

Liquid leakage detection in a server room or datacentre. 

Due to our enormous understanding and massive knowledge of this business, we are involved in offering 2 Zone Water Leak Detection System.

Other Details:

J3 Technology make water leak detection panels are designed to the latest technology confirm to international standards ensuring top quality performance and Absolut reliability and easy installation. Designed to compel with is -2189 -1999 and ip 54.

Cabinet :

The control panel cabinet is fabricated from crca sheet of 16 swg and is properly pretreated before. painted with power coated p.o. red / siemens grey / textured white. the cabinet is dust proof.

Circuit:

Control circuit are fully solid state consist of glossy epoxy circuit board(1.6 mm thick) and treated with a protec- tive layer of special lacquer for protection against corrosion. all the card are moduler concept and plug in type for inter-changeable. one sets of common NO/ NC/ C contacts are available in alarm conditions as per requirement'

Functioning Descriptions:

The water Leak Detection Panel is the central processing unit of the system, providing the audible and visual information to the user, initiating automatic alarm response sequences and providing the means by which the user interacts with the system.

The Water Leak Detection Panel shall be able to be easily configured to meet the exact detection zone and cause/ effects output requirement of the building.Each zone card shall be capable of providing 300mA current and shall maintain a minimum of 24v on the zone up to the full extent of the battery standby period.

WATER LEAK ALARM INDICATION:

The water leak Detection Panel shall monitor the status of all Sensor Cable on the zone for water, and the status of internal connection and interfaces including charger and batteries.

SALIENT FEATURE:

Micro controller based compact modular designed

The module enables a water alarm panel to be controlled by a state of the micro controller.

With built in 16 character LCD display.

Hustle free instant installation.

Soft touch type control and test switch on fascia.

Auto re-store after alarm / fault.

Provision for attachment of public address system and Auto dialer facility (optional)

Match with interior design of premises.

Custom built configuration possible with potential free for integration with Building management systems.

System can be integrated with all standard industry products.

Provision for alarm and fault repeaters.

Zonal panel dry contacts.

TECHNICAL SPECIFICATIONOF PANEL

 

Model                                         : J3-Saini-Z2 , J3-Saini -Z4 & J3-Saini-Z8

Power                                         : AC220V/50HZ+10% and 24 AC

Voltage scope                            : 18v-28V

Charging voltage                       :27.6V

Charging current                       : 1AMP(MAX.)

 

EOL resister                              :4k7

Materials                                   : M.S. Sheet 16SWG

Color                                         : Siemens Gray

Dimension                                : 355 x 285 x 110mm approx..(up to 4 zone)

Weight                                      : 4 kg. Approx. without bat.

Battery                                     : 2 x 12 v/7 Ah

 

 

SILENCE FEATURE:

1.      Micro controller based compact modular designed

2.      The module enables a water alarm panel to be controlled by a state of the micro controller.

3.      With built in 1 -line and 16-character LCD display

4.      Hustle free instant installation.

5.      Soft touch type control key and test switch on fascia.

6.      Provision for attachment of public address system and Auto dialer facility(optional)

7.      Match with interior design of premises.

8.      Custom built -in configuration possible for integration with Building management system.

9.      System can be integrated with all standard industry products.

10.   Provision for alarm and fault repeaters.

11.   Zone wise zonal panel dry contacts (optional)

Due to our enormous understanding and massive knowledge of this business, we are involved in offering J3 Technology Digital Water Leak Detector.

Other Details:

J3 Technology make water leak detection panels are designed to the latest technology confirm to international standards ensuring top quality performance and Absolut reliability and easy installation. Designed to compel with is -2189 -1999 and ip 54.

Cabinet :

The control panel cabinet is fabricated from crca sheet of 16 swg and is properly pretreated before. painted with power coated p.o. red / siemens grey / textured white. the cabinet is dust proof.

Circuit:

Control circuit are fully solid state consist of glossy epoxy circuit board(1.6 mm thick) and treated with a protec- tive layer of special lacquer for protection against corrosion. all the card are moduler concept and plug in type for inter-changeable. one sets of common NO/ NC/ C contacts are available in alarm conditions as per requirement'

Functioning Descriptions:

The water Leak Detection Panel is the central processing unit of the system, providing the audible and visual information to the user, initiating automatic alarm response sequences and providing the means by which the user interacts with the system.

The Water Leak Detection Panel shall be able to be easily configured to meet the exact detection zone and cause/ effects output requirement of the building.Each zone card shall be capable of providing 300mA current and shall maintain a minimum of 24v on the zone up to the full extent of the battery standby period.

Water Leak Alarm Indication:

The water leak Detection Panel shall monitor the status of all Sensor Cable on the zone for water, and the status of internal connection and interfaces including charger and batteries.

Salient Feature:

• Micro controller based compact modular designed
• The module enables a water alarm panel to be controlled by a state of the micro controller.
• With built in 16 character LCD display.
• Hustle free instant installation.
• Soft touch type control and test switch on fascia.
• Auto re-store after alarm / fault.
• Provision for attachment of public address system and Auto dialer facility (optional)
• Match with interior design of premises.
• Custom built configuration possible with potential free for integration with Building management systems.
• System can be integrated with all standard industry products.
• Provision for alarm and fault repeaters.
• Zonal panel dry contacts.

TECHNICAL SPECIFICATIONOF PANEL

 

Model                                         : J3-Saini-Z2 , J3-Saini -Z4 & J3-Saini-Z8

Power                                         : AC220V/50HZ+10% and 24 AC

Voltage scope                            : 18v-28V

Charging voltage                       :27.6V

Charging current                       : 1AMP(MAX.)

 

EOL resister                              :4k7

Materials                                   : M.S. Sheet 16SWG

Color                                         : Siemens Gray

Dimension                                : 355 x 285 x 110mm approx..(up to 4 zone)

Weight                                      : 4 kg. Approx. without bat.

Battery                                     : 2 x 12 v/7 Ah

 

 

SILENCE FEATURE:

1.      Micro controller based compact modular designed

2.      The module enables a water alarm panel to be controlled by a state of the micro controller.

3.      With built in 1 -line and 16-character LCD display

4.      Hustle free instant installation.

5.      Soft touch type control key and test switch on fascia.

6.      Provision for attachment of public address system and Auto dialer facility(optional)

7.      Match with interior design of premises.

8.      Custom built -in configuration possible for integration with Building management system.

9.      System can be integrated with all standard industry products.

10.   Provision for alarm and fault repeaters.

11.   Zone wise zonal panel dry contacts (optional)

Due to our enormous understanding and massive knowledge of this business, we are involved in offering Water Leak Detection System.

Other Details:

J3 Technology make water leak detection panels are designed to the latest technology confirm to international standards ensuring top quality performance and Absolut reliability and easy installation. Designed to compel with is -2189 -1999 and ip 54.

Cabinet :

The control panel cabinet is fabricated from crca sheet of 16 swg and is properly pretreated before. painted with power coated p.o. red / siemens grey / textured white. the cabinet is dust proof.

Circuit:

Control circuit are fully solid state consist of glossy epoxy circuit board(1.6 mm thick) and treated with a protec- tive layer of special lacquer for protection against corrosion. all the card are moduler concept and plug in type for inter-changeable. one sets of common NO/ NC/ C contacts are available in alarm conditions as per requirement'

Functioning Descriptions:

The water Leak Detection Panel is the central processing unit of the system, providing the audible and visual information to the user, initiating automatic alarm response sequences and providing the means by which the user interacts with the system.

The Water Leak Detection Panel shall be able to be easily configured to meet the exact detection zone and cause/ effects output requirement of the building.Each zone card shall be capable of providing 300mA current and shall maintain a minimum of 24v on the zone up to the full extent of the battery standby period.

4 Zone Water Leak Detection Panel

WLD4ZMB (our Panel has Open Protocol)

The WLD4ZMB range of products is designed to detect water leaks at localised points using the cable sensor. All these sensors are used with the WLD4ZMB
 microcontroller based intelligent panel that are suitable for wall mounting inside AHUs, power distribution units or general areas where leak detection is required. They are fitted as standard with LCD indication for healthy, fault & the water leak status. The external sounder can be muted by simply pressing the mute button. Existing water leak detection systems available in the market, uses a 12V /24V DC supply for sensing leaks. When DC excitation is used in the sensing cables they form electrolysis during the presence of water and forms corrosion around the sensing cables. This reduces the sensitivity over a period of time to virtually zero. However WLDM200 module uses AC as a sensing voltage, it does not corrode or degrade due to the alternating nature of the current and hence maintains the sensitivity of the sensing cables throughout its life time

The WLD4ZMB panel 4 relay outputs can either be utilised to integrate with BMS to activate individual zone alarm. The WLD4ZMB panel has built in MODBUS RTU port equipped with RS485 and hence can be integrated to any BMS software seamlessly.

Features .

• Monitor up to 200 meters of Conductive Fluid sensing cable .
• Micro Controller based innovative technology. Configure up to 4 Zones 
• Trigger individual Relay Output for each zone and activates common fire & Hooter relay. 
• Access the devices remotely via remote BMS via MODBUS protocol. Zone names can be configured 
• Log an extensive variety of events and alarms. 

 

Due to our enormous understanding and massive knowledge of this business, we are involved in offering J3 Technology Digital Water Leak Detector.

Other Details:

J3 Technology make water leak detection panels are designed to the latest technology confirm to international standards ensuring top quality performance and Absolut reliability and easy installation. Designed to compel with is -2189 -1999 and ip 54.

Cabinet :

The control panel cabinet is fabricated from crca sheet of 16 swg and is properly pretreated before. painted with power coated p.o. red / siemens grey / textured white. the cabinet is dust proof.

Circuit:

Control circuit are fully solid state consist of glossy epoxy circuit board(1.6 mm thick) and treated with a protec- tive layer of special lacquer for protection against corrosion. all the card are moduler concept and plug in type for inter-changeable. one sets of common NO/ NC/ C contacts are available in alarm conditions as per requirement'

Functioning Descriptions:

The water Leak Detection Panel is the central processing unit of the system, providing the audible and visual information to the user, initiating automatic alarm response sequences and providing the means by which the user interacts with the system.

The Water Leak Detection Panel shall be able to be easily configured to meet the exact detection zone and cause/ effects output requirement of the building.Each zone card shall be capable of providing 300mA current and shall maintain a minimum of 24v on the zone up to the full extent of the battery standby period.

Water Leak Alarm Indication:

The water leak Detection Panel shall monitor the status of all Sensor Cable on the zone for water, and the status of internal connection and interfaces including charger and batteries.

Salient Feature:

• Micro controller based compact modular designed
• The module enables a water alarm panel to be controlled by a state of the micro controller.
• With built in 16 character LCD display.
• Hustle free instant installation.
• Soft touch type control and test switch on fascia.
• Auto re-store after alarm / fault.
• Provision for attachment of public address system and Auto dialer facility (optional)
• Match with interior design of premises.
• Custom built configuration possible with potential free for integration with Building management systems.
• System can be integrated with all standard industry products.
• Provision for alarm and fault repeaters.
• Zonal panel dry contacts.

We J3 Technology are the leading Manufacturer And Exporter of an extensive array of, Fire Extinguishers, Water Leak Detection System, Junction Box, Water Leak Sensor Cable, Industrial Hooter, MS Coupling, etc.
We deals in mumbai and pan India

TECHNICAL SPECIFICATIONOF PANEL

 

Model                                         : J3-Saini-Z2 , J3-Saini -Z4 & J3-Saini-Z8

Power                                         : AC220V/50HZ+10% and 24 AC

Voltage scope                            : 18v-28V

Charging voltage                       :27.6V

Charging current                       : 1AMP(MAX.)

 

EOL resister                              :4k7

Materials                                   : M.S. Sheet 16SWG

Color                                         : Siemens Gray

Dimension                                : 355 x 285 x 110mm approx..(up to 4 zone)

Weight                                      : 4 kg. Approx. without bat.

Battery                                     : 2 x 12 v/7 Ah

 

 

SILENCE FEATURE:

1.      Micro controller based compact modular designed

2.      The module enables a water alarm panel to be controlled by a state of the micro controller.

3.      With built in 1 -line and 16-character LCD display

4.      Hustle free instant installation.

5.      Soft touch type control key and test switch on fascia.

6.      Provision for attachment of public address system and Auto dialer facility(optional)

7.      Match with interior design of premises.

8.      Custom built -in configuration possible for integration with Building management system.

9.      System can be integrated with all standard industry products.

10.   Provision for alarm and fault repeaters.

11.   Zone wise zonal panel dry contacts (optional)

Water Leak Detection Module ( Single Zone Panel ) Model J3WLD Amx-2 can be used with  Water Leak Sensor cable maximum length you can used 100 meter and Minimum Length 5Mtrs . This panel has Inbuild Buzzer and Potencial free Contact for BMS. Panel work on 230 volt AC Supply.